Fuzzeebear Automotives Focus Project
+2
stickerseg
Van Man
6 posters
Page 1 of 2
Page 1 of 2 • 1, 2
Fuzzeebear Automotives Focus Project
Hey Guys. This is my on going focus project. Just want to see what you guys think. Alot of hard work by myself, blood sweat and tears has gone into this project. I think i'm around 3/4 of the way to my ideal finished car
COLLECTION
This is the day I collected it - 1.6 16v Engine
STANDARDISING
First thing I did was sell the genuine morrettes
And fit a set of standard mk1.5's
Next came a new bonnet.
Shame I couldn't run like this all the time
Much Better
Bought a standard mk1.5 front bumper then
Ripped the side skirts off to reveal the damage
Looks a totally different car already
Then came a standard mk1 rear bumper
COLLECTION
This is the day I collected it - 1.6 16v Engine
STANDARDISING
First thing I did was sell the genuine morrettes
And fit a set of standard mk1.5's
Next came a new bonnet.
Shame I couldn't run like this all the time
Much Better
Bought a standard mk1.5 front bumper then
Ripped the side skirts off to reveal the damage
Looks a totally different car already
Then came a standard mk1 rear bumper
Re: Fuzzeebear Automotives Focus Project
MODIFYING TIME
Stage 1
Then came the new wheels. 17 x 7 Wolfrace Street Octane.
6k HID kit
Volt gauge in custom speedo surround
The Bishop smoothing the front bumper
Single din stereo conversion sprayed in Frozen white, white painted heater rings
Next came fitting of the coilovers, strut brace and all new bushes - Coilovers are FK AK Street
Doors smoothed and partly painted
Street modding at it's finest
All in matt black, with temp pro race 1.2's on it
WORK IN PROGRESS STICKER
3/4 sized numberplate
Time for a new dash
Dark smoke window tints - fronts where taken off after ths picture
So the plan was to finish the bodywork and get the car painted for Mod Nats 2011, but the show was getting closer and closer and the goal was slipping further away. So The Bishop came up with an idea............
Stage 1
Then came the new wheels. 17 x 7 Wolfrace Street Octane.
6k HID kit
Volt gauge in custom speedo surround
The Bishop smoothing the front bumper
Single din stereo conversion sprayed in Frozen white, white painted heater rings
Next came fitting of the coilovers, strut brace and all new bushes - Coilovers are FK AK Street
Doors smoothed and partly painted
Street modding at it's finest
All in matt black, with temp pro race 1.2's on it
WORK IN PROGRESS STICKER
3/4 sized numberplate
Time for a new dash
Dark smoke window tints - fronts where taken off after ths picture
So the plan was to finish the bodywork and get the car painted for Mod Nats 2011, but the show was getting closer and closer and the goal was slipping further away. So The Bishop came up with an idea............
Re: Fuzzeebear Automotives Focus Project
Stage 2
So we decided on new wheels and to wrap the car
Collected my new wheels and had Fred @FutureShock Audio spray them frozen white
18 x 7 BSA Bullets
Half way through wrap - Thanks to Ade @ CEGUK for supplying the vinyl
Front bumper and sill left
3 days before mod nats. Tuck away in a garage having the roof wrapped.
Wrap complete - Thanks to The Bishop and Jemma for all the hard work.
Start of the advertising
2 days before mod nats my interior arrives - Thanks to AlexBoy!
ST170 interior, custom stitched and embriodered with 2 headrest screens
Stayed like that for a while.
Carbon wrapped speedo surround
Then the changes began again...................
So we decided on new wheels and to wrap the car
Collected my new wheels and had Fred @FutureShock Audio spray them frozen white
18 x 7 BSA Bullets
Half way through wrap - Thanks to Ade @ CEGUK for supplying the vinyl
Front bumper and sill left
3 days before mod nats. Tuck away in a garage having the roof wrapped.
Wrap complete - Thanks to The Bishop and Jemma for all the hard work.
Start of the advertising
2 days before mod nats my interior arrives - Thanks to AlexBoy!
ST170 interior, custom stitched and embriodered with 2 headrest screens
Stayed like that for a while.
Carbon wrapped speedo surround
Then the changes began again...................
Re: Fuzzeebear Automotives Focus Project
Stage 3
Depo ST170 headlights - DTM cup mirrors - Standard sized plate
Whats Claypole doing here?
Off comes the wrap!!!!!!
Now I see this picture and I love it, but when I see it in red and white I like it as well.......
Fully sprayed satin black - Thanks to Claypole
On holiday
Then came the next part. After driving 6 months on 3 buckled wheels I was glad to see this site at 8am one morning
18 x 8 Focus RS Mk2 replicas - Best mod I have ever done
Decided I wanted to do something that would make me stand out for the WelshFord vs FastFord shoot so had The Bishop wrap my roof for me...
Bit more advertising
Black double din stereo surround - Black heater rings - Standard black gear knob
As it stands now......
TIME FOR STAGE 4 - WATCH THIS SPACE
THERE ARE SO MANY PICTURES I HAVE MISSED IN EACH STAGE, JUST GAVE A QUICK GLIMPSE OF WHAT HAS HAPPENED IN THE PAST YEAR. IT HASN'T BEEN EASY BY ANY MEANS, FEW PROBLEMS, AND A FEW HISSY FITS BUT I AM HERE NOW!!!!
Depo ST170 headlights - DTM cup mirrors - Standard sized plate
Whats Claypole doing here?
Off comes the wrap!!!!!!
Now I see this picture and I love it, but when I see it in red and white I like it as well.......
Fully sprayed satin black - Thanks to Claypole
On holiday
Then came the next part. After driving 6 months on 3 buckled wheels I was glad to see this site at 8am one morning
18 x 8 Focus RS Mk2 replicas - Best mod I have ever done
Decided I wanted to do something that would make me stand out for the WelshFord vs FastFord shoot so had The Bishop wrap my roof for me...
Bit more advertising
Black double din stereo surround - Black heater rings - Standard black gear knob
As it stands now......
TIME FOR STAGE 4 - WATCH THIS SPACE
THERE ARE SO MANY PICTURES I HAVE MISSED IN EACH STAGE, JUST GAVE A QUICK GLIMPSE OF WHAT HAS HAPPENED IN THE PAST YEAR. IT HASN'T BEEN EASY BY ANY MEANS, FEW PROBLEMS, AND A FEW HISSY FITS BUT I AM HERE NOW!!!!
Re: Fuzzeebear Automotives Focus Project
Stage 4 - 2012 Mods
So after dicking around
2012 mods have started
On goes new one, cut properly around the exhaust
Front bumper has had lower grille removed, cut the 4 slats, then removed the rad plastics to make it a proper wide mouth (haven't seen any others like this)
Fitted a tegiwa plate bracket then
Thats it for now, need to resmooth bumpers and doors, then paint.
Todays progress
Started the general shaping of the rear bumper smoothing
Also reskimmed the front bumper and corner stripe
Booked in weds for my roof
So spent a good few hours stripping the roof off
Took all the stickers off as well
Went for a quick wash out Flat Out Valeting
Got my roof done then
Full custom digital printed blue camo
Looks alot better now
Only 1 advertising sticker on my car now
Interior panels have been wrapped. Not perfect because the vinyl is too thick as its meant for outisde only but will do for now
Rear bumper nearly finished now
trimmed and fitted
not the best job as vinyl was way too thick, got something else lined up though hopefully sort it before performance action day
So after dicking around
2012 mods have started
On goes new one, cut properly around the exhaust
Front bumper has had lower grille removed, cut the 4 slats, then removed the rad plastics to make it a proper wide mouth (haven't seen any others like this)
Fitted a tegiwa plate bracket then
Thats it for now, need to resmooth bumpers and doors, then paint.
Todays progress
Started the general shaping of the rear bumper smoothing
Also reskimmed the front bumper and corner stripe
Booked in weds for my roof
So spent a good few hours stripping the roof off
Took all the stickers off as well
Went for a quick wash out Flat Out Valeting
Got my roof done then
Full custom digital printed blue camo
Looks alot better now
Only 1 advertising sticker on my car now
Interior panels have been wrapped. Not perfect because the vinyl is too thick as its meant for outisde only but will do for now
Rear bumper nearly finished now
trimmed and fitted
not the best job as vinyl was way too thick, got something else lined up though hopefully sort it before performance action day
Re: Fuzzeebear Automotives Focus Project
This is where I am now. All copied and pasted from another forum, so if it don't make total sense you know why
nice mate
mate that looks nice built not brought
stickerseg- Posts : 55
Join date : 2012-03-14
Age : 36
Location : oxford
very nice mate
look great! you can see from the pictures how much effort has gone into this car, and its paid off!! looks lush!! x
X SARAH X- Posts : 135
Join date : 2012-03-14
Age : 34
Location : Oxford
Re: Fuzzeebear Automotives Focus Project
its the fact I took a fully modified car and ripped it apart
and comments like this make all the blood and tears worth while
Cheers guys
and comments like this make all the blood and tears worth while
Cheers guys
Re: Fuzzeebear Automotives Focus Project
Gave the car a clean today to chill me out as I was in a terrible mood
Forgot how nice the seats come up with a clean and treatment
Nice spray for Concours Car Cares fresh air as well mmmmmmm smells and looks lovely for 5 mins
Looks like I will be getting 2 but more like 4 tyres in the next few weeks. Suppose thats the joys of big wheels on a slammed car! Sometimes looking good has it's consequences
Forgot how nice the seats come up with a clean and treatment
Nice spray for Concours Car Cares fresh air as well mmmmmmm smells and looks lovely for 5 mins
Looks like I will be getting 2 but more like 4 tyres in the next few weeks. Suppose thats the joys of big wheels on a slammed car! Sometimes looking good has it's consequences
Re: Fuzzeebear Automotives Focus Project
it does, but its well worth it at the end of the day
X SARAH X- Posts : 135
Join date : 2012-03-14
Age : 34
Location : Oxford
Re: Fuzzeebear Automotives Focus Project
Car has been branded now
Plans for the few final bits before the show are in place hopefully should be looking nice for Performace Action day
Plans for the few final bits before the show are in place hopefully should be looking nice for Performace Action day
Re: Fuzzeebear Automotives Focus Project
2 new front tyres yesterday.
Bit of sanding on my door and front bumper today anlong with fitted my finished smoothed rear bumper
Bit of sanding on my door and front bumper today anlong with fitted my finished smoothed rear bumper
Re: Fuzzeebear Automotives Focus Project
gave it a quick rinse this morning
but ended up washing it in the afternoon
Gave the engine bay a quick clean adn dress as well
but ended up washing it in the afternoon
Gave the engine bay a quick clean adn dress as well
Re: Fuzzeebear Automotives Focus Project
haha like the duracell thing lol
pricey- Posts : 53
Join date : 2012-03-14
Age : 34
Location : oxford
Re: Fuzzeebear Automotives Focus Project
quick shot when we was out today
front bumper looks bad still
Mod Nats 10th Anniversary stickers
Gave it a quick wash using Concours Car Care Pink Champange shampoo, and was giving it a wipe down with my super big microfibre drying towel
Hopefully car will be ready for PAD. Going up to Evesham on Sat to do some more work on it with my mate Uz @ Fuzzeebear Automotive
front bumper looks bad still
Mod Nats 10th Anniversary stickers
Gave it a quick wash using Concours Car Care Pink Champange shampoo, and was giving it a wipe down with my super big microfibre drying towel
Hopefully car will be ready for PAD. Going up to Evesham on Sat to do some more work on it with my mate Uz @ Fuzzeebear Automotive
Re: Fuzzeebear Automotives Focus Project
4 new tyres fitted, full tank of fuel ready for my road trip to Evesham saturday. Hoping to have a productive day then, get alot done
Re: Fuzzeebear Automotives Focus Project
What a long day
Fuse box cover - Battery Cover - Washer bottle top - Slam panel - dip stick all painted in Satin Black
Enlosed Induction kit painted satin black and fitted with FB stickers
Black suede speedo surround
Black suede stereo surround
Blue FB sticker - Merc SLR mirrors
Fuse box cover - Battery Cover - Washer bottle top - Slam panel - dip stick all painted in Satin Black
Enlosed Induction kit painted satin black and fitted with FB stickers
Black suede speedo surround
Black suede stereo surround
Blue FB sticker - Merc SLR mirrors
Re: Fuzzeebear Automotives Focus Project
progress is coming along nicely mate, must say im loving the logo on the induction kit
Re: Fuzzeebear Automotives Focus Project
Few pictures from the work my mate did friday for me
Needs some more paint Nearly done
Needs some more paint Nearly done
Re: Fuzzeebear Automotives Focus Project
Finished the paint today
Decided to tint my fogs as well
Just got to wait for my custom carbon badges to arrive for my dash, should have them before the show on Saturday
Decided to tint my fogs as well
Just got to wait for my custom carbon badges to arrive for my dash, should have them before the show on Saturday
Page 1 of 2 • 1, 2
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|